Introduction
The KNIME Database Extension provides a set of KNIME nodes that allow connecting to JDBC-compliant databases. These nodes reside in the DB category in the Node Repository, where you can find a number of database access, manipulation and writing nodes.
The database nodes are part of every KNIME Analytics Platform installation. It is not necessary to install any additional KNIME Extensions.
This guide describes the KNIME Database extension, and shows, among other things, how to connect to a database, and how to perform data manipulation inside the database.
Port Types
There are two types of ports in the Database extension, the DB Connection port (red) and the DB Data port (dark red).
The DB Connection port stores information about the current DB Session, e.g data types, connection properties, JDBC properties, driver information, etc.
The DB Data port contains not only the DB Session, but also the DB Data object, which is described by a SQL query.
Outport views
After executing a DB node, you can inspect the result in the outport view by right clicking the node and selecting the outport to inspect at the bottom of the menu. For more information on how to execute a node, please refer to the Quickstart Guide.
DB Connection outport view
The outport view of a DB Connection has the DB Session tab, which contains the information about the current database session, such as database type, and connection URL.
DB Data outport view
When executing a database manipulation node that has a DB Data outport, for example a DB GroupBy node, what the node does is to build the necessary SQL query to perform the GroupBy operation selected by the user and forward it to the next node in the workflow. It does not actually execute the query. However, it is possible to inspect a subset of the intermediate result via the DB Data outport view. In addition to information about the DB Session, the DB Data outport view contains the preview and specification of the output data.
The Table Preview tab in the outport view shows an empty table at the beginning. Clicking on Cache no. of rows: will execute the intermediate SQL query and cache a subset of the output which then will be shown in the outport view. By default only the first 100 rows are cached, but you can set your own value at the top.
| Depending on the complexity of the SQL query, caching the first 100 rows might take a long time. |
The table specification can be inspected in the DB Spec tab. It contains the list of columns in the table, with their database types and the corresponding KNIME data types (For more information on the type mapping between database types and KNIME types, please refer to the Type Mapping section. In order to get the table specification, a query that only fetches the metadata but not the data itself is executed during configuration of the node or during execution. Execution of the metadata query during configure can be disabled via the Advanced Tab of the Connector node.
The DB Query tab contains the intermediate SQL query that defines the data at this outport. The query consists of the queries that were created in the preceding database nodes, and will only be executed when you want to retrieve the result in a KNIME data table, for example using the DB Reader node.
Session Handling
The DB Session lifecycle is managed by the Connector nodes. Executing a Connector node will create a DB Session, and resetting the node or closing the workflow will destroy the corresponding DB Session.
Connecting to a database
The DB → Connection subcategory in the Node Repository contains
-
a set of database-specific connector nodes for commonly used databases such as Microsoft SQL Server, MySQL, PostgreSQL, H2, etc.
-
as well as the generic Database Connector node.
A Connector node creates a connection to a database via its JDBC driver. In the configuration dialog of a Connector node you need to provide information such as the database type, the location of the database, and the authentication method if available.
| The database-specific connector nodes already contain the necessary JDBC drivers and provide a configuration dialog that is tailored to the specific database. It is recommended to use these nodes over the generic DB Connector node, if possible. |
Connecting to predefined databases
The following are some databases that have their own dedicated Connector node:
-
Amazon Redshift
-
Amazon Athena
-
Google BigQuery
-
H2
-
Microsoft Access
-
Microsoft SQL Server
-
MySQL
-
Oracle
-
PostgreSQL
-
SQLite
-
Vertica
| Some dedicated Connector nodes, such as Google BigQuery or Amazon Redshift, come without a JDBC driver due to licensing restriction. If you want to use these nodes, you need to register the corresponding JDBC driver first. Please refer to the Register your own JDBC drivers section on how to register your own driver. For Amazon Redshift, please refer to the Third-party Database Driver Plug-in section. |
If no dedicated connector node exists for your database, you can use the generic DB Connector node. For more information on this please refer to the Connecting to other databases section.
After you find the right Connector node for your database, double-click on the node to open the configuration dialog. In the Connection Settings window you can provide the basic parameters for your database, such as the database type, dialect, location, or authentication. Then click Ok and execute the node to establish a connection.
KNIME Analytics Platform in general provides three different types of connector nodes the File-based Connector node , the Server-based Connector node and the generic Connector nodes which are explained in the following sections.
File-based Connector node
Figure 4. H2 Connector configuration dialog
|
The figure on the left side shows an example of the node dialog for a file-based database, such as SQLite, H2, or MS Access. The most important node settings are described below: Configuration: In the configuration window you can choose the registered database dialect and driver. Location: The location to the database. You can provide either the path to an existing database, or choose in-memory to create a temporary database that is kept in memory if the database supports this feature. |
Server-based Connector node
Figure 5. MS SQL Server Connector configuration dialog
|
The figure on the left side shows an example of the node dialog for a server-based database, such as MySQL, Oracle, or PostgreSQL. The most important node settings are described below. Configuration: In the configuration window you can choose the registered database dialect and driver. Location: The location to the database. You should provide the hostname and the port of the machine that hosts the database, and also the name of the database which might be optional depending on the database. Authentication: Login credentials can either be provided via credential flow variables, or directly in the configuration dialog in the form of username and password. Kerberos authentication is also provided for databases that support this feature, e.g Hive or Impala. For more information on Kerberos authentication, please refer to the Kerberos User Guide. |
| For more information on the JDBC Parameters and Advanced tab, please refer to the JDBC Parameters and Advanced Tab section. The Type Mapping tabs are explained in the Type Mapping section. |
Third-party Database Driver Plug-in
As previously mentioned, the dedicated database-specific connector nodes already contain the necessary JDBC drivers. However, some databases require special licensing that prevents us from automatically installing or even bundling the necessary JDBC drivers with the corresponding connector nodes. For example, KNIME provides additional plug-ins to install the Oracle Database driver, official Microsoft SQL Server driver or the Amazon Redshift driver which require special licenses.
To install the plug-ins, go to File → Install KNIME Extensions…. In the Install window, search for the driver that you need (Oracle, MS SQL Server or Redshift), and you will see something similar to the figure below. Then select the plug-in to install it. If you don’t see the plug-in in this window then it is already installed. After installing the plug-in, restart KNIME. After that, when you open the configuration dialog of the dedicated Connector node, you should see that the installed driver of the respective database is available in the driver name list.
Connecting to other databases
The generic DB Connector node can connect to arbitrary JDBC compliant databases. The most important node settings are described below.
Database Type: Select the type of the database the node will connect to. For example, if the database is a PostgreSQL derivative select Postgres as database type. if you don’t know the type select the default type.
Database Dialect: Select the database dialect which defines how the SQL statements are generated.
Driver Name: Select an appropriate driver for your specific database. If there is no matching JDBC driver it first needs to be registered, see Register your own JDBC drivers. Only drivers that have been registered for the selected database type will be available for selection.
Database URL: A driver-specific JDBC URL. Enter the database information in the placeholder, such as the host, port, and database name.
Authentication: Login credentials can either be provided via credential flow variables, or directly in the configuration dialog in the form of username and password. Kerberos authentication is also provided for databases that support this feature, e.g Hive or Impala. For more information on Kerberos authentication, please refer to the Kerberos User Guide.
| The selected database type and dialect determine which data types, statements such as insert, update, and aggregation functions are supported. |
If you encounter an error while connecting to a third-party database, you can enable the JDBC logger option in the Advanced Tab. If this option is enabled all JDBC operations are written into the KNIME log which might help you to identify the problems. In order to tweak how KNIME interacts with your database e.g. quotes identifiers you can change the default settings under the Advanced Tab according to the settings of your database. For example, KNIME uses " as the default identifier quoting, which is not supported by default by some databases (e.g Informix). To solve this, simply change or remove the value of the identifier delimiter setting in the Advanced Tab.
Register your own JDBC drivers
For some databases KNIME Analytics Platform does not contain a ready-to-use JDBC driver. In these cases, it is necessary to first register a vendor-specific JDBC driver in KNIME Analytics Platform. Please consult your database vendor to obtain the JDBC driver. A list of some of the most popular JDBC drivers can be found below.
| The JDBC driver has to be JDBC 4.1 or above compliant. |
To set up JDBC drivers on KNIME Server, please refer to the section JDBC drivers on KNIME Hub and KNIME Server.
To register your vendor-specific JDBC driver, go to File → Preferences → KNIME → Databases.
Clicking Add will open a new database driver window where you can provide the JDBC driver path and all necessary information, such as:
-
ID: The unique ID of the JDBC driver consisting only of alphanumeric characters and underscore.
-
Name: The unique name of the JDBC driver.
-
Database type: The database type. If you select a specific database type e.g. MySQL the driver will be available for selection in the dedicated connector node e.g. MySQL Connector. However if your database is not on the list, you can choose default, which will provide you with all available parameters in the Advanced Tab. Drivers that are registered for the default type are only available in the generic DB Connector node.
-
Description: Optional description of the JDBC driver.
-
URL template: The JDBC driver connection URL format which is used in the dedicated connector nodes. If you select a database other than default in the Database type, the URL template will be preset with the default template for the selected database. Please refer to the URL Template syntax information below or the JDBC URL Template section for more information.
-
URL Template syntax information: Clicking on the question mark will open an infobox which provides information about the URL template syntax in general. Additionally, if you select a database other than default in the Database type, one or more possible URL template examples will be provided for the selected database type, which you can copy and paste in the URL template field.
-
Classpath: The path to the JDBC driver. Click Add file if the driver is provided as a single .jar file, or Add directory if the driver is provided as a folder that contains several .jar files. Some vendors offer a .zip file for download, which needs to be unpacked to a folder first.
| If the JDBC driver requires native libraries e.g DLLs you need to put all of them into a single folder and then register this folder via the Add directory button in addition to the JDBC driver .jar file. |
-
Driver class: The JDBC driver class and version will be detected automatically by clicking Find driver classes. Please select the appropriate class after clicking the button.
| If your database is available in the Database type drop down list, it is better to select it instead of setting it to default. Setting the Database type to default will allow you to only use the generic DB Connector node to connect to the database, even if there is a dedicated Connector node for that database. |
| KNIME Server can distribute JDBC drivers automatically to all connected KNIME Analytics Platform clients (see JDBC drivers on KNIME Hub and KNIME Server). |
JDBC URL Template
When registering a JDBC driver, you need to specify its JDBC URL template, which will be used by the dedicated
Connector node to create the final database URL. For example, jdbc:oracle:thin:@<host>:<port>/<database> is a
valid driver URL template for the
Oracle thin driver.
For most databases you don’t have to find the suitable URL template by yourself, because the
URL Template syntax information provides at least one URL template example for a database.
The values of the variables in the URL template, e.g <host>, <port>, or <database> can be specified in
the configuration dialog of
the corresponding Connector node.
Tokens:
-
Mandatory value (e.g.
<database>): The referenced token must have a non-blank value. The name between the brackets must be a valid token name (see below for a list of supported tokens). -
Optional value (e.g.
[database]): The referenced token may have a blank value. The name between the brackets must be a valid token name (see below for a list of supported tokens). -
Conditions (e.g.
[location=in-memory?mem:<database>]): This is applicable for file-based databases, such as H2, or SQLite. The first?character separates the condition from the content that will only be included in the URL if the condition is true. The only explicit operator available currently is=, to test the exact value of a variable. The left operand must be a valid variable name, and the right operand the value the variable is required to have for the content to be included. The content may include mandatory and/or optional tokens (<database>/[database]), but no conditional parts. It is also possible to test if a variable is present. In order to do so, specifying the variable name e.g. database as the condition. E.g.jdbc:mydb://<host>:<port>[database?/databaseName=<database>]will result injdbc:mydb://localhost:10000/databaseName=db1if the database name is specified in the node dialog otherwise it would bejdbc:mydb://localhost:10000.
For server-based databases, the following tokens are expected:
-
host: The value of the Hostname field on the Connection Settings tab of a Connector node.
-
port: The value of the Port field on the Connection Settings tab of a Connector node.
-
database: The value of the Database name field on the Connection Settings tab of a Connector node.
For file-based databases, the following tokens are expected:
-
location: The Location choice on the Connection Settings tab of a Connector node. The file value corresponds to the radio button next to Path being selected, and in-memory to the radio button next to In-memory. This variable can only be used in conditions.
-
file: The value of the Path field on the Connection Settings tab of a Connector node. This variable is only valid if the value of the location is
file. -
database: The value of the In-memory field on the Connection Settings tab of a Connector node. This variable is only valid if the value of the location is
in-memory.
| Field validation in the configuration dialog of a Connector node depends on whether the (included) tokens referencing them are mandatory or optional (see above). |
List of common JDBC drivers
Below is a selected list of common database drivers you can add among others to KNIME Analytics Platform:
| The list above only shows some example of database drivers that you can add. If your driver is not in the list above, it is still possible to add it to KNIME Analytics Platform. |
Advanced Database Options
JDBC Parameters
The JDBC parameters allow you to define custom JDBC driver connection parameter. The value of a parameter can be a constant, variable, credential user, credential password or KNIME URL. For more information about the supported connection parameter please refer to your database vendor.
The figure below shows an example of SSL JDBC parameters with different variable types. You can set a boolean value to enable or disable SSL, you can also use a KNIME relative URL to point to the SSLTrustStore location, or use a credential input for the trustStorePassword parameter.
Please be aware that when connecting to PostgreSQL with SSL the key file has
to first be converted to either pkcs12 or pkcs8 format. For more information
about the supported driver properties see the
PostgreSQL documentation.
|
Advanced Tab
The settings in the Advanced tab allow you to define KNIME framework properties such as connection handling, advanced SQL dialect settings or query logging options. This is the place where you can tweak how KNIME interacts with the database e.g. how the queries should be created that are send to the database. In the Metadata section you can also disable the metadata fetching during configuration of a node or alter the timeout when doing so which might be necessary if you are connected to a database that needs more time to compute the metadata of a created query or you are connected to it via a slow network.
The full available options are described as follow:
Connection
-
Automatically reconnect to database: Enables or disables the reconnection to the database if the connection is invalid. Connection depending object will no longer exist after reconnection.
-
Reconnect to database timeout: Time interval in seconds to wait before canceling the reconnection to the database. A value of 0 indicates the standard connection timeout.
-
Restore database connection: Enables or disables the restoration of the database connection when an executed connector node is loaded.
-
Validation query: The query to be executed for validating that a connection is ready for use. If no query is specified KNIME calls the Connection.isValid() method to validate the connection. Only errors are checked, no result is required.
Dialect capabilities
-
CASE expressions: Whether CASE expressions are allowed in generated statements.
-
CREATE TABLE CONSTRAINT name: Whether names can be defined for CONSTRAINT definitions in CREATE TABLE statements.
-
DROP TABLE statement: Whether DROP TABLE statements are part of the language.
-
Derived table reference: Whether table references can be derived tables.
-
Insert into table from query: Whether insertion into a table via a select statement is supported, e.g. INSERT INTO T1 (C1) (SELECT C1 FROM T2).
Dialect syntax
-
CREATE "temporary" TABLE syntax: The keyword or keywords for creating temporary tables.
-
CREATE TABLE "if not exists" syntax: The syntax for the table creation statement condition "if not exists". If empty, no such statement will automatically be created, though the same behavior may still be non-atomically achieved by nodes.
-
Delimit only identifier with spaces: If selected, only identifiers, e.g. columns or table names, with spaces are delimited.
-
Identifier delimiter (closing): Closing delimiter for identifier such as column and table name.
-
Identifier delimiter (opening): Opening delimiter for identifier such as column and table name.
-
Identifier non-word character replacement: The replacement for non-word characters in identifiers when their replacement is enabled. An empty value results in the removal of non-word characters.
-
Replace non-word characters in identifiers: Whether to replace non-word characters in identifiers, e.g. table or column names. Non-word characters include all characters other than alphanumeric characters (a-z, A-Z, 0-9) and underscore (_).
-
Table reference keyword: The keyword before correlation names in table references.
JDBC logger
-
Enable: Enables or disables logger for JDBC operations.
JDBC parameter
-
Append JDBC parameter to URL: Enables or disables appending of parameter to the JDBC URL instead of passing them as properties.
-
Append user name and password to URL: Enables or disables appending of the user name and password to the JDBC URL instead of passing them as properties.
-
JDBC URL initial parameter separator: The character that indicates the start of the parameters in the JDBC URL.
-
JDBC URL parameter separator: The character that separates two JDBC parameter in the JDBC URL.
JDBC statement cancellation
-
Enable: Enables or disables JDBC statement cancellation attempts when node execution is canceled.
-
Node cancellation polling interval: The amount of milliseconds to wait between two checking of whether the node execution has been canceled. Valid range: [100, 5000].
Metadata
-
Flatten sub-queries where possible: Enables or disables sub-query flattening. If enabled sub-queries e.g.
SELECT * FROM (SELECT * FROM table) WHERE COL1 > 1will becomeSELECT * FROM table WHERE COL1 > 1. By default this option is disabled since query flattening is usually the job of the database query optimizer. However some database either have performance problems when executing sub-queries or do not support sub-queries at all. In this case enabling the option might help. However not all queries are flatten so even enabled sub-queries might be send to the database. -
List of table types to show in metadata browser: Comma separated list of table types to show in metadata browser. Some databases e.g. SAP HANA support more than the standard
TABLEandVIEWtype such asCALC VIEW,HIERARCHY VIEWandJOIN VIEW. -
Retrieve in configure: Enables or disables retrieving metadata in configure method for database nodes.
-
Retrieve in configure timeout: Time interval in seconds to wait before canceling a metadata retrieval in configure method. Valid range: [1, ).
Transaction
-
Enabled: Enables or disables JDBC transaction operations.
Misc
-
Fail if WHERE clause contains any missing value: Check every value of a WHERE clause (e.g., update, delete or merge) and fail if one is missing.
-
Fetch size: Hint for the JDBC driver about the number of rows that should be fetched from the database when more rows are needed. Valid range: [0,).
-
Support multiple databases: Enables or disables support for multiple databases in a single statement.
Dedicated DB connectors (e.g. Microsoft SQL Server Connector) and built-in drivers usually show only a subset of the above mentioned options since most options are predefined, such as whether the database supports CASE statements, etc.
Examples
In this section we will provide examples on how to connect to some widely-known databases.
Connecting to Oracle
The first step is to install the Oracle Database JDBC driver which is provided as a separate plug-in due to license restrictions. Please refer to Third-party Database Driver Plug-in for more information about the plug-in and how to install it.
| It is also possible to use your own Oracle Database driver if required. For more details refer to the Register your own JDBC drivers section. |
Once the driver is installed you can use the dedicated Oracle Connector node. Please refer to Connecting to predefined databases on how to connect using dedicated Connector nodes.
Kerberos authentication
To use this mode, you need to select Kerberos as authentication method in the Connection Settings tab of the Oracle Connector. For more information on Kerberos authentication, please refer to the Kerberos User Guide. In addition, you need to specify the following entry in the JDBC Parameters tab: oracle.net.authentication_services with value (KERBEROS5). Please do not forget to put the value in brackets. For more details see the Oracle documentation.
Connecting to Databricks
To connect to Databricks, you need to install the KNIME Databricks Integration.
The next step is to download the Databricks Simba JDBC driver from the official website to your machine. Then go to File → Preferences → KNIME → Databases, and click Add.
| KNIME provides Apache Hive JDBC driver for Databricks which you can use as a fallback driver. But it is strongly recommended to use the official JDBC driver provided in the link above. |
In the new database driver window, provide the following information:
-
ID: Databricks, but you can enter your own driver ID as long as it only contains alphanumeric characters and underscores.
-
Name: Databricks, but you can enter your own driver name.
-
Database type: Databricks is available in the drop down list, so the database type is set to databricks.
-
Description: My Databricks driver, for example.
-
URL template: By selecting databricks in the Database type, the URL template is automatically preset to the default JDBC URL template for Databricks, i.e
jdbc:spark://<host>:<port>/default. For more possible templates, simply click on the URL Template syntax information directly below. Please refer to the JDBC URL Template section for more information on the supported tokens e.g. host, port and database. -
Classpath: Click Add file to add the Databricks JDBC driver file. The path to the driver file will then appear in the Classpath area.
-
Driver class: clicking Find driver classes will automatically detect all available JDBC driver classes and versions, which in this case is com.simba.spark.jdbc4.Driver in version 2.6.0.
After filling all the information, click Ok, and the newly added driver will appear in the database driver preferences table. Click Apply and Close to apply the changes.
To connect to Databricks, you need to first create a Databricks environment that is connected to an existing Databricks cluster. To do this, use the Create Databricks Environment node. In the configuration window, you need to provide:
-
Databricks URL: Full URL of the Databricks deployment, which is either https://<account>.cloud.databricks.com on AWS or https://<region>.azuredatabricks.net on Azure.
-
Cluster ID: Unique identifier of a cluster in the Databricks workspace.
-
Workspace ID: Workspace ID for Databricks on Azure, leave blank on AWS.
In the DB Port → Driver tab, you can select the driver name, which in this case is the Databricks Simba JDBC driver we have registered previously.
Connecting to Google BigQuery
To connect to BigQuery, you need to install the KNIME BigQuery Extension.
Due to license restrictions the BigQuery JDBC driver is not part of KNIME Analytics Platform and needs to be downloaded and registered separately. To download the BigQuery JDBC driver please visit the official website. Then go to File → Preferences → KNIME → Databases, and click Add.
In the new database driver window, provide the following information:
-
ID: BigQuery, but you can enter your own driver ID as long as it only contains alphanumeric characters and underscores.
-
Name: BigQuery, but you can enter your own driver name.
-
Database type: BigQuery is available in the drop down list, so the database type is set to bigquery.
-
Description: My Google BigQuery driver, for example.
-
URL template: By selecting bigquery in the Database type, the URL template is automatically preset to the default JDBC URL template for BigQuery, i.e
jdbc:bigquery://<host>:<port>;ProjectId=<database>. Please refer to the URL Template syntax information directly below or the JDBC URL Template section for more information on the supported tokens e.g. host, port and database. -
Classpath: Click Add file to add the BigQuery JDBC driver file. The path to the driver file will then appear in the Classpath area.
-
Driver class: clicking Find driver classes will automatically detect all available JDBC driver classes and versions, which in this case is com.simba.googlebigquery.jdbc42.Driver in version 1.2.0.
After filling all the information, click Ok, and the newly added driver will appear in the database driver preferences table. Click Apply and Close to apply the changes.
To connect to the BigQuery server, we suggest to use the Google Authentication (API Key) node to authenticate and create a connection to the Google APIs, and then the Google BigQuery Connector node to connect to BigQuery. As an alternative you can also specify the driver specific authentication information via the JDBC Parameters tab.
In the configuration window of the Google Authentication (API Key) node, you need to provide:
-
Service account email: Email address of the service account. Please see the BigQuery documentation for more information on how to create a service account.
-
P12 key file location: Path to the private P12 key file. While creating a service account email, you can create a service account key in the form of either JSON or P12 key/credentials. Note that only P12 keys are supported here.
-
Scopes: The scopes that will be granted for this connection. Please see the Google documentation on the list of available BigQuery API scopes. For example, selecting Google BigQuery Connection allows you to view and manage your data in Google BigQuery.
| Only P12 keys are supported in the Google Authentication (API Key) node! |
After the connection is successfully established, it can be used as the input Google Service Connection for the Google BigQuery Connector node. The configuration window contains as follows:
-
Driver Name: The name of the BigQuery driver we have given earlier when we registered the driver. In our example it is BigQuery.
-
Hostname: The hostname (or IP address) of a Google BigQuery server.
-
Port: The port on which the Google BigQuery server is listening. The default port is 443.
-
Database Name: The name (project ID) of the database you want to connect to.
Connecting to Microsoft SQL Server
The dedicated Microsoft SQL Server Connector node is bundled by default with the jTDS for Microsoft SQL Server driver. If you want to use the official driver for Microsoft SQL Server instead, KNIME provides an additional plug-in to install the driver. Please refer to Third-party Database Driver Plug-in for more information about the plug-in and how to install it.
It is also possible to use your own Microsoft SQL Server driver. To register your own driver please refer to the Register your own JDBC drivers
section. However, the Microsoft SQL Server driver might require several native libraries, such as DLLs. In that case you need to copy all
the required native libraries into a single folder and then register this folder via the Add directory button in addition
to the JDBC .jar file in the database driver window. This step is not required if you use the provided jTDS for Microsoft SQL Server
driver or the official driver for Microsoft SQL Server installed through the plug-in.
| All necessary files such as the sqljdbc_auth.dll or the ntlmauth.dll are part of the provided drivers. |
After installing the JDBC driver, you can use the Microsoft SQL Server Connector node to start connecting to Microsoft SQL Server. Please refer to Connecting to predefined databases for more information on how to connect using dedicated Connector nodes.
Microsoft SQL Server supports the so-called Windows native authentication mode. If you want to use this mode, simply select None/native authentication in the Authentication setting in the configuration window. The following sections explain how to use this mode depending on which driver you use.
| Windows native authentication only works on Windows. If you are running workflows on KNIME Hub or KNIME Server the KNIME Executor will most likely run on Linux which requires user login as well as additional JDBC parameters. For details see the following section. |
Windows native authentication (NTLM) using the official driver for Microsoft SQL Server
To use this mode with the provided official driver for Microsoft SQL Server, KNIME Analytics Platform needs to run on a Windows machine and you need to be logged in a Windows domain that is accepted by the Microsoft SQL Server you are connecting to. In addition, you need to specify the following entry in the JDBC Parameters tab:
integratedSecurity=true
For more details see the Microsoft documentation.
If KNIME Analytics Platform runs on a non-Windows machine, you need to provide the user name and password of the Windows domain user you want to use for authentication. To do so please select either the Credentials option or the Username & password option.
In addition, you need to specify the following entries in the JDBC Parameters tab:
authenticationScheme=NTLM domain=<<Windows domain name>>
For more details about the required parameters see the Microsoft JDBC driver documentation.
Windows native authentication (NTLM) using the jTDS driver for Microsoft SQL Server
If you are using the provided jTDS for Microsoft SQL Server driver and KNIME Analytics Platform runs on a Windows machine that is logged into a Windows domain that is accepted by the Microsoft SQL Server you are connecting to, then you don’t need to specify any JDBC parameters.
If KNIME Analytics Platform runs on a non-Windows machine, you need to provide the user name and password of the Windows domain user you want to use for authentication. To do so please select either the Credentials option or the Username & password option. In addition, you need to specify the following entry in the JDBC Parameters tab:
domain=<<Windows domain name>>
For more details see the description of the domain property in the jTDS FAQ or see the README.sso.
Kerberos authentication using the official driver for Microsoft SQL Server
To use this mode with the provided official driver for Microsoft SQL Server, simply select Kerberos in the Authentication setting in the configuration window. In addition, you need to specify the following entries in the JDBC Parameters tab:
authenticationScheme=JavaKerberos integratedSecurity=true
For more details see the Microsoft documentation.
Connecting to SQL Pools in Azure Synapse Analytics
You can use the dedicated Microsoft SQL Server Connector node to connect to a dedicated SQL pool or serverless SQL pool in Azure Synapse Analytics. Before connecting you need to install the official driver for Microsoft SQL Server that is provided as an additional plug-in. Please refer to Third-party Database Driver Plug-in for more information about the plug-in and how to install it. It is also possible to use your own Microsoft SQL Server driver. To register your own driver please refer to the Register your own JDBC drivers section.
To connect you need to obtain the serverless and/or dedicated SQL endpoint and a login user e.g. the SQL administration user first. This information is available via the Synapse workspace view in Azure Portal.
Once you have the official driver installed and all necessary information available you can configure the Microsoft SQL Server Connector node. To do so open the node dialog and enter the serverless or dedicated SQL endpoint as hostname with master as default database. Enter the login information into the authentication section as shown below. Instead of a username and password you can also use Azure Active Directory login if this is configured in your Synapse workspace using the Microsoft Authentication node and the dynamic input port of the Microsoft SQL Server Connector.
In addition you need to specify the following JDBC parameters via the JDBC Parameters tab:
-
TrustServerCertificate: false
-
encrypt: true
-
hostNameInCertificate: *.sql.azuresynapse.net
For more details about the JDBC parameters see the Microsoft documentation.
Finally, for serverless SQL pools you need to disabled transaction since they are not support via the Advanced Tab by unselecting the Enabled value in the Transaction section.
Connecting to Apache Hive™
To connect to Hive, you need to install the KNIME Big Data Connectors Extension.
The dedicated Hive Connector node is bundled by default with the open-source Apache Hive JDBC driver. Proprietary drivers are also supported, but need to be registered first, such as the Hive JDBC connector provided by Cloudera.
In this example we want to connect to Hive using the proprietary Cloudera Hive JDBC driver. The first step is to download the latest Hive JDBC driver for Cloudera Enterprise. Then go to File → Preferences → KNIME → Databases, and click Add.
In the new database driver window, provide the following information:
-
ID: cloudera_hive, but you can enter your own driver ID as long as it only contains alphanumeric characters and underscores.
-
Name: Cloudera Hive, but you can enter your own driver name.
-
Database type: Hive is available in the drop down list, so the database type is set to hive.
-
Description: My Hive driver, for example.
-
URL template: Please make sure that this field contains
jdbc:hive2://<host>:<port>/[database]. Please refer to the JDBC URL Template section for more information on the supported tokens e.g. host, port and database. -
Classpath: Click Add file to add the
.jarfile that contains the Hive JDBC driver. The path to the driver file will then appear in the Classpath area. -
Driver class: clicking Find driver classes will automatically detect all available JDBC driver classes and versions. Please make sure to select com.cloudera.hive.jdbc41.HS2Driver.
Finally, click Ok and the newly added driver will appear in the database driver preferences table. Click Apply and Close to apply the changes and you can start connecting to your Hive database.
Hive has a dedicated Connector node called Hive Connector, please refer to Connecting to predefined databases on how to connect using dedicated Connector nodes.
Connecting to Apache Impala™
To connect to Apache Impala, you need to install the KNIME Big Data Connectors Extension.
The dedicated Impala Connector node is bundled by default with the open-source Apache Hive JDBC driver, which is compatible with Impala. Proprietary drivers are also supported, but need to be registered first, such as the Impala JDBC connector provided by Cloudera.
In this example we want to connect to Impala using the proprietary Cloudera Impala JDBC driver. The first step is to download the latest Impala JDBC driver for Cloudera Enterprise. Then go to File → Preferences → KNIME → Databases, and click Add.
In the new database driver window, provide the following information:
-
ID: cloudera_impala, but you can enter your own driver ID as long as it only contains alphanumeric characters and underscores.
-
Name: Cloudera Impala, but you can enter your own driver name.
-
Database type: Impala is available in the drop down list, so the database type is set to impala.
-
Description: My Impala driver, for example.
-
URL template: By selecting impala in the Database type, the URL template is automatically preset to the default JDBC URL template for Impala, i.e
jdbc:impala://<host>:<port>/[database]. For more possible templates, simply click on the URL Template syntax information directly below. Please refer to the JDBC URL Template section for more information on the supported tokens e.g. host, port and database. -
Classpath: Click Add file to add the
.jarfile that contains the Impala JDBC driver file. The path to the driver file will then appear in the Classpath area. -
Driver class: clicking Find driver classes will automatically detect all available JDBC driver classes and versions, which in this case is com.cloudera.impala.jdbc.Driver .
Finally, click Ok and the newly added driver will appear in the database driver preferences table. Click Apply and Close to apply the changes and you can start connecting to your Impala database.
Impala has a dedicated Connector node called Impala Connector, please refer to Connecting to predefined databases on how to connect using dedicated Connector nodes.
Reading from a database
The figure above is an example on how to read from a database. In this example we want to read the flights dataset stored in an H2 database into a KNIME data table.
First you need a connector node to establish a connection to the database, in the example above it is an H2 database. There are several dedicated connector nodes depending on which database we want to connect to. For further details on how to connect to a database refer to the Connecting to a database section .
Figure 29. DB Table Selector configuration dialog
|
After the connection is established, the next step is to use the DB Table Selector node that allows selecting a table or a view interactively based on the input database connection. The figure on the left side shows the configuration dialog of the DB Table Selector node. At the top part you can enter the schema and the table/view name that you want to select, in this example we want to select the "flights" table. |
Pressing the Select a table button will open a Database Metadata Browser window that lists available tables/views in the database.
In addition, ticking the Custom Query checkbox will allow you to write your own custom SQL query to narrow down the result. It accepts any SELECT statement, and the placeholder #table# can be used to refer to the table selected via the Select a table button.
The Input Type Mapping tab allows you to define mapping rules from database types to KNIME types. For more information on this, please refer to the section Type Mapping.
The output of this node is a DB Data connection that contains the database information and the SQL query automatically build by the framework that selects the entered table or the user entered custom query. To read the selected table or view into KNIME Analytics Platform, you can use the DB Reader node. Executing this node will execute the input SQL query in the database and the output will be the result stored in a KNIME data table which will be stored on the machine where KNIME Analytics Platform is running.
Database Metadata Browser
Figure 30. Database Metadata Browser
|
The Database Metadata Browser shows the database schema, including all tables / views and their corresponding columns and column data types. At first opening it fetches the metadata from the database and caches it for subsequent use. By clicking on an element (schema/table/view) it shows the contained elements. To select a table or view select the name and click OK or double click the element. The search box at the top of the window allows you to search for any table or view inside the database. At the bottom there is a refresh button to re-fetch the schema list with a time reference on how long ago the schema was last refreshed. |
| If you have just created a table and you cannot find it in the schema list, it might be that the metadata browser cache is not up to date, so please try to refresh the list by clicking the refresh button at the lower right corner. |
Query Generation
Figure 31. DB Query nodes
|
Once you have successfully connected to your database, there is a set of nodes that provide in-database data manipulation, such as aggregating, filtering, joining etc. The database nodes come with a visual user interface and automatically build a SQL query in the background according to the user settings in the configuration window, so no coding is required to interact with the database. The output of each node is a SQL query that corresponds to the operation(s) that are performed within the node. The generated SQL query can be viewed via the DB Data outport view . |
Visual Query Generation
The figure above shows an example of in-database data manipulation. In this example, we read the flights dataset from a H2 database. First we filter the rows so that we take only the flights that fulfil certain conditions. Then we calculate the average air time to each unique destination airport. Finally we join the average values together with the original values and then read the result into KNIME Analytics Platform.
DB Row Filter
After selecting the table, you can start working with the data. First we use the DB Row Filter node to filter rows according to certain conditions. The figure above shows the configuration dialog of the DB Row Filter. On the left side there is a Preview area that lists all conditions of the filter to apply to the input data. Filters can be combined and grouped via logical operators such as AND or OR. Only rows that fulfil the specified filter conditions will be kept in the output data table. At the bottom there are options to:
-
Add Condition: add more condition to the list
-
Group: Create a new logical operator (AND or OR)
-
Ungroup: Delete the currently selected logical operator
-
Delete: Delete the selected condition from the list
To create a new condition click on the Add_Condition button. To edit a condition select in the condition list which will show the selected condition in the condition editor on the right. The editor consists of at least two dropdown lists. The most left one contains the columns from the input data table, and the one next to it contains the operators that are compatible with the selected column type, such as =, !=, <, >. Depending on the selected operation a third and maybe fourth input field will be displayed to enter or select the filter values. The button next to the values fields fetches all possible values for the selected column which will then be available for selection in the value field.
Clicking on a logical operator in the Preview list would allow you to switch between AND or OR, and to delete this operator by clicking Ungroup.
As in our example, we want to return all rows that fulfil the following conditions:
-
Originate from the Chicago O’Hare airport (ORD) OR Hartsfield-Jackson Atlanta Airport (ATL)
-
AND occur during the month of June 2017
-
AND have a mild arrival delay between 5 and 45 minutes
DB GroupBy
The next step is to calculate the average air time to each unique destination airport using the DB GroupBy node. To retrieve the number of rows per group tick the Add Count(*) checkbox in the Advanced Settings. The name of the group count column can be changed via the result column name field.
To calculate the average air time for each destination airport, we need to group by the Dest column in the Groups tab, and in Manual Aggregation tab we select the ActualElapsedTime column (air time) and AVG as the aggregation method.
DB Joiner
To join the result back to the original data, we use the DB Joiner node, which joins two database tables based on joining column(s) of both tables. In the Joiner settings tab, there are options to choose the join mode, whether Inner Join, Full Outer Join, etc, and the joining column(s).
In the Column Selection tab you can select which columns from each of the table you want to include in the output table. By default the joining columns from bottom input will not show up in the output table.
Advanced Query Building
Sometimes, using the predefined DB nodes for manipulating data in database is not enough. This section will explain some of the DB nodes that allow users to write their own SQL queries, such as DB Query, DB Query Reader, and Parametrized DB Query Reader node.
| Each DB manipulation node, that gets a DB data object as input and returns a DB data object as output, wraps the incoming SQL query into a sub-query. However some databases don’t support sub-queries, and if that is the case, please use the DB Query Reader node to read data from the database. |
The figure below shows the configuration dialog of the DB Query node. The configuration dialog of other advanced query nodes that allow user to write SQL statements provide a similar user experience. There is a text area to write your own SQL statement, which provides syntax highlighting and code completion by hitting Ctrl+Space. On the lower side there is an Evaluate button where you can evaluate the SQL statement and return the first 10 rows of the result. If there is an error in the SQL statement then an error message will be shown in the Evaluate window. On the left side there is the Database Metadata Browser window that allows you to browse the database metadata such as the tables and views and their corresponding columns. The Database Column List contains the columns that are available in the connected database table. Double clicking any of the items will insert its name at the current cursor position in the SQL statement area.
DB Query
The DB Query node modifies the input SQL query from an incoming database data connection. The SQL query from the
predecessor is represented by the place holder #table# and will be replaced during execution.
The modified input query is then available at the outport.
DB Query Reader
Executes an entered SQL query and returns the result as KNIME data table. This node does not alter or wrap the query and thus supports all kinds of statements that return data.
This node supports other SQL statements beside SELECT, such as DESCRIBE TABLE.
|
Parameterized DB Query Reader
This node allows you to execute a SQL query with different parameters. It loops over the input KNIME table and takes the values from the input table to parameterise the input SQL query. Since the node has a KNIME data table input it provides a type mapping tab that allows you to change the mapping rules. For more information on the Type Mapping tab, please refer to the Type Mapping section.
DB Looping
This node runs SQL queries in the connected database restricted by the possible values given by the input table. It restricts each SQL query so that only rows that match the possible values from the input table are retrieved whereas the number of values per query can be defined. This node is usually used to execute IN queries e.g.
SELECT * FROM table WHERE Col1 IN ($Col1_values$)
During execution, the column placeholder $Col1_values$ will be replaced by a comma separated list of values from the input table. Since the node has a KNIME data table input it provides a type mapping tab that allows you to change the mapping rules. For more information on the Type Mapping tab, please refer to the Type Mapping section.
An example of the usage of this node is available on KNIME Hub.
Database Structure Manipulation
Database Structure Manipulation refers to any manipulation to the database tables. The following workflow demonstrates how to remove an existing table from a database using the DB Table Remover and create a new table with the DB Table Creator node.
DB Table Remover
This node removes a table from the database defined by the incoming database connection.
Executing this node is equivalent to executing the SQL command
DROP.
In the configuration dialog, there is an option to select the database table to be removed.
The configuration is the same as in the DB Table Selector node, where you can input the corresponding Schema and the
table name, or select it in the Database Metadata Browser.
The following options are available in the configuration window:
Cascade: Selecting this option means that removing a table that is referenced by other tables/views will remove not only the table itself but also all dependent tables and views. If this option is not supported by your database then it will be ignored.
Fail if table does not exist: Selecting this option means the node will fail if the selected table does not exist in the database. By default, this option is not enabled, so the node will still execute successfully even if the selected table does not exist in the database.
DB Table Creator
This node creates a new database table. The table can be created either manually, or dynamically based on the input data table spec. It supports advanced options such as specifying if a column can contain null values or specifying primary key or unique keys as well as the SQL type.
When the Use dynamic settings option is enabled the database table structure is defined by the structure of the input KNIME data table. The Columns and Keys tabs are read only and only help to verify the structure of the table that is created. The created database table structure can be influenced by changing the type mapping e.g. by defining that KNIME double columns should be written to the database as string columns the DB Table Creator will choose the string equivalent database type for all double columns. This mapping and also the key generation can be further influenced via the Dynamic Type Settings and Dynamic Key Settings tabs.
In the Settings tab you can input the corresponding schema and table name. The following options are available:
Create temporary table: Selecting this will create a temporary table. The handling of temporary tables, such as how long it exists, the scope of it, etc depends on the database you use. Please refer to your database vendor for more details on this.
Fail if table exists: Selecting this will make the node fail with database-specific error message if the table already exists. By default, this option is disable, so the node will execute successfully and not create any table if it already existed.
Use dynamic settings: Selecting this will allow the node to dynamically define the structure of the database table e.g. column names and types based on the input KNIME table and the dynamic settings tabs. Only if this option is enabled will the Dynamic Type Settings and Dynamic Column Settings tab be available. The mappings defined in the Name-Based SQL Type Mapping have a higher priority than the mappings defined in the KNIME-Based SQL Type Mapping. If no mapping is defined in both tabs, the default mapping based on the Type Mapping definitions of the database connector node are used. Note that while in dynamic settings mode the Columns and Keys tab become read-only to allow you a preview of the effect of the dynamic settings.
In the Columns tab you can modify the mapping between the column names from the input table and their corresponding SQL type manually. You can add or remove column and set the appropriate SQL type for a specific column. However, if the Use dynamic settings is selected, this tab become read-only and serves as a preview of the dynamic settings.
In the Key tab you can set certain columns as primary/unique keys manually. As in the Columns tab, if the Use dynamic settings is enabled, this tab become read-only and serves as a preview of the dynamic settings.
In the Additional Options tab you can write additional SQL statement which will be appended after the CREATE TABLE statement, e.g storage parameter. This statement will be appended to the end of the automatically generated CREATE TABLE statement and executed as a single statement.
In the Dynamic Columns Settings there are two types of SQL Type Mapping, the Name-Based and the KNIME-Based.
-
In the Name-Based SQL Type Mapping you define the default SQL type mapping for a set of columns based on the column names. You can add a new row containing the name pattern of the columns that should be mapped. The name pattern can either be a string with wildcard or a regular expression. The mappings defined in the Name-Based SQL Type Mapping have a higher priority than the mappings defined in the KNIME-Based SQL Type Mapping.
-
In the KNIME-Type-Based SQL Type Mapping you can define the default SQL type mapping based on a KNIME data type. You can add a new row containing the KNIME data type that should be mapped.
In the Dynamic Keys Settings you can dynamically define the key definitions based on the column names. You can add a new row containing the name pattern of the columns that should be used to define a new key. The name pattern can either be a string with wildcard or a regular expression.
| Supported wildcards are * (matches any number of characters) and ? (matches one character) e.g. KNI* would match all strings that start with KNI such as KNIME whereas KNI? would match only strings that start with KNI followed by a fourth character. |
DB Manipulation
This section describes various DB nodes for in-database manipulation, such as DB Delete (Table), DB Writer, DB Insert, DB Update, DB Merge, and DB Loader node, as well as the database transaction nodes.
DB Delete
The database extension provides two nodes to delete rows from a selected table in the database. The DB Delete (Table) node deletes all rows from the database table that match the values of an input KNIME data table whereas the DB Delete (Filter) node deletes all rows from the database table that match the specified filter conditions.
DB Delete (Table)
This node deletes rows from a selected table in the database. The input is a DB Connection port that describes the database, and also a KNIME data table containing the values which define which rows to delete from the database. It deletes data rows in the database based on the selected columns from the input table. Therefore all selected column names need to exactly match the column names inside the database. Only the rows in the database table that match the value combinations of the selected columns from the KNIME input data table will be deleted.
The figure below shows the configuration dialog of the DB Delete (Table) node. The configuration dialog of the other nodes for DB Manipulation are very similar. You can enter the table name and its corresponding schema or select the table name in the Database Metadata Browser by clicking Select a table.
In addition the identification columns from the input table need to be selected. The names of the selected KNIME
table columns have to match the names in the selected database table. All rows in the database table with matching
values for the selected columns from the input KNIME data table will be deleted. In SQL this is equivalent to
the WHERE columns. There are three options:
-
Fail on error: if selected, the node will fail if any errors occur during execution otherwise it will execute successfully even if one of the input rows caused an exception in the database.
-
Append delete status columns: if selected, it will add two extra columns in the output table. The first column contains the number of rows affected by the
DELETEstatement. A number greater or equal to zero indicates that the operation was performed successfully. A value of -2 indicates that the operation was performed successfully but the number of rows affected is unknown. The second column will contain a warning message if any exists. -
Disable DB Data output port: If selected, it will disable the DB Data output port and the execution of the metadata query at the end of the node execution which might cause problems with databases that do not support subqueries.
The Output Type Mapping tab allows you to define mapping rules from KNIME types to database types. For more information on this, please refer to the Type Mapping section.
DB Delete (Filter)
This node deletes rows from a selected table in the database that match the specified filter conditions. The input is a DB Connection port that can be exchanged to a DB Data port. In both cases the input port describes the database. The output port can be exchanged from a DB Connection to a DB Data port as well.
In the node dialog of the DB Delete (Filter) node you can enter the table name and its corresponding schema or
select the table name in the Database Metadata Browser by clicking Select a table. In addition you can specify the filter
conditions that are used to identify the rows in the database table that should be deleted.
The conditions are used to generate the WHERE clause of the
DELETE statement.
All rows that match the filter conditions will be deleted.
For example, the settings specified in the figure shown below will delete all rows from the flights table that took place prior the Year 2017 and that where neither Diverted nor Cancelled.
An example of the usage of this node is available on KNIME Hub.
DB Writer
This node inserts the selected values from the input KNIME data table
into the specified database tables.
It performs the same function as the DB Insert node, but in addition
it also creates the database table automatically if it does not exist prior inserting the values.
The newly created table will have a column for each selected input KNIME column.
The database column names will be the same as the names of the input KNIME columns.
The database column types are derived from the given KNIME types and the
Type Mapping configuration. All database columns will allow missing values
(e.g. NULL).
Please use the DB Table Creator node if you want to control the properties of the created database table.
There is also an option to overwrite an existing table by enabling the option Remove existing table in the configuration window. Enabling the option will remove any table with the given name from the database and then create a new one. If this option is not selected, the new data rows will be appended to an existing table. Once the database table exists the node will write all KNIME input rows into the database table in the same way as the DB Insert node.
DB Insert
This node inserts the selected values from the input KNIME data table into the specified database tables. All selected column names need to exactly match the column names within the database table.
DB Update
This node updates rows in the specified database table with values from
the selected columns of the input KNIME data table.
The identification columns are used in the WHERE part of the SQL statement
and identify the rows in the database table that will be updated.
The columns to update are used in the SET part of the SQL statement and contain the values that will be written to
the matching rows in the selected database table.
DB Merge
The DB Merge node is a combination of the DB Update and DB Insert node.
If the database supports the functionality it executes a MERGE
statement that inserts all new rows or updates all existing rows in the selected database table. If the database
does not support the merge function the node first tries to update all rows in the database table and then
inserts all rows where no match was found during the update.
The names of the selected KNIME table columns need to match the names of the database table where the rows should
be updated.
DB Loader
| Starting from 4.3, the DB Loader node employs the new file handling framework, which allows seamless migration between various file systems. For more details, please check out the KNIME File Handling Guide. |
This node performs database-specific bulk loading functionality that only some databases (e.g. Hive, Impala, MySQL, PostgreSQL and H2) support to load large amounts of data into an existing database table.
| Most databases do not perform data checks when loading the data into the table which might lead to a corrupt data table. The node does perform some preliminary checks such as checking that the column order and column names of the input KNIME data table are compatible with the selected database table. However it does not check the column type compatibility or the values itself. Please make sure that the column types and values of the KNIME table are compatible with the the database table. |
Depending on the database an intermediate file format (e.g. CSV, Parquet, ORC) is often used for efficiency which might be required to upload the file to a server. If a file needs to be uploaded, any of the protocols supported by the file handling nodes and the database can be used, e.g. SSH/SCP or FTP. After the loading of the data into a table, the uploaded file gets deleted if it is no longer needed by the database. If there is no need to upload or store the file for any reason, a file connection prevents execution.
Some databases such as MySQL and PostgreSQL support file-based and memory-based uploading which require different rights in the database. For example, if you do not have the rights to execute the file-based loading of the data try the memory-based method instead.
| If the database supports various loading methods (file-based or memory-based), you can select the method in the Options tab, as shown in the example below. Otherwise the Loader mode option will not appear in the configuration dialog. |
Depending on the connected database the dialog settings may change. For example, MySQL and PostgreSQL use a CSV file for the data transfer. In order to change how the CSV file is created go to the Advanced tab.
DB Transaction Nodes
The database extension also provides nodes to simulate database transaction. A transaction allows you to group several database data manipulation operations into a single unit of work. This unit either executes entirely or not at all.
DB Transaction Start
The DB Transaction Start node starts a transaction using the input database connection. As long as the transaction is in process, the input database connection cannot be used outside of the transaction. Depending on the isolation level, other connections might not see any changes in the database while the transaction is in process. The transaction uses the default isolation level of the connected database.
DB Transaction End
The DB Transaction End node ends the transaction of the input database connection. The node ends the transaction with a commit that makes all changes visible to other users if executed successfully. Otherwise the node ends the transaction with a rollback returning the database to the state at the beginning of the transaction.
This node has 2 input ports. The first one is the transactional DB connection port which should be connected to from the end of the transaction chain. The second port should contain the transactional DB connection from the output of the DB Transaction Start node. If the transaction is successful and a commit is executed, the DB connection from the first input port will be forwarded to the output port, otherwise in case of a rollback, the DB connection from the second input port will be forwarded.
The figure below shows an example of the transaction nodes. In this example, the transaction consists of two DB Writer nodes that write data to the same table consecutively. If an error occurs during any step of the writing, the changes will not be executed and the database will be returned to the previous state at the beginning of the transaction. If no error occurs, the changes to the database will be commited.
Type Mapping
The database framework allows you to define rules to map from database types to KNIME types and vice versa. This is necessary because databases support different sets of types e.g. Oracle only has one numeric type with different precisions to represent integers but also floating-point numbers whereas KNIME uses different types (integer, long, double) to represent them.
Especially date and time formats are supported differently across different databases. For example the zoned date time type that is used in KNIME to represent a time point within a defined time zone is only supported by few databases. But with the type mapping framework you can force KNIME to automatically convert the zoned date time type to string before writing it into a database table and to convert the string back into a zoned date time value when reading it.
The type mapping framework consists of a set of mapping rules for each direction specified from the KNIME Analytics Platform view point:
-
Output Type Mapping: The mapping of KNIME types to database types
-
Input Type Mapping: The mapping from database types to KNIME types
Each of the mapping direction has two sets of rules:
-
Mapping by Name: Mapping rules based on a column name (or regular expression) and type. Only column that match both criteria are considered.
-
Mapping by Type: Mapping rules based on a KNIME or database type. All columns of the specified data type are considered.
The type mapping can be defined and altered at various places in the analysis workflow. The basic configuration can be done in the different connector nodes. They come with a sensible database specific default mapping. The type mapping rules are part of the DB Connection and DB Data connections and inherited from preceding nodes. In addition to the connector nodes provide all database nodes with a KNIME data table a Output Type Mapping tab to map the data types of the nodes input KNIME columns to the types of the corresponding database columns.
The mapping of database types to KNIME types can be altered for any DB Data connection via the DB Type Mapper node.
DB Type Mapper
The DB Type Mapper node changes the database to KNIME type mapping configuration for subsequent nodes by selecting a KNIME type to the given database Type. The configuration dialog allows you to add new or change existing type mapping rules. All new or altered rules are marked as bold.
| Rules from preceding nodes can not be deleted but only altered. |
Migration
This section explains how to migrate your workflow that contains deprecated database nodes to the new database framework. The Workflow Migration Tool can be used to guide you through the process and convert the deprecated database nodes to the corresponding new database nodes. For the mapping between the deprecated and the new nodes, please look at the list in the Node Name Mapping section.
| All previously registered JDBC drivers need to be re-registered. For more information on how to register a driver in the new database framework, please refer to the Register your own JDBC drivers section. |
Workflow Migration Tool
| The workflow migration tool is still in preview. We will continue to add new and revise existing functionality. |
The workflow migration tool assists you to migrate existing workflows that contain deprecated database nodes to the new database nodes. The tool does not change any existing workflow but performs the migration on a copy of the original workflow.
As an example, we can see in the figure below a workflow that contains deprecated database nodes. The goal is to use the Workflow Migration Tool to help us migrating the deprecated nodes to the new database nodes.
In order to start the Workflow Migration tool we simply need to open the workflow containing the deprecated database nodes that you want to migrate. A message will appear at the top of the workflow with the option to migrate the workflow (see figure above).
Clicking on Migrate workflow… will open the migration wizard window as shown below. In this window, you can change the workflow to migrate (the one containing the deprecated database nodes), and enter the name for the new workflow, which is a copy of the old workflow but with the deprecated database nodes replaced with the new ones (if available). The default name for the new workflow is the name of the old workflow with (migrated) attached as suffix.
| The original workflow will not be modified throughout the migration process. |
Click next to get to the next page, as shown below. At this stage the workflow will be analysed, and all deprecated database nodes for which a migration rule exists will be listed here, along with their equivalent new nodes. The tool also performs a preliminary check and shows any potential problems. If you agree with the mapping suggestion, click Next to perform the migration process.
After the migration process is finished, you can see the migration report like the one shown below. If any warnings or problems happened during the migration process, corresponding messages will be shown in the report. You also have the option to save and open the migration report in HTML format.
The figure below shows the migrated workflow where all deprecated database nodes are replaced by the new database nodes while keeping all the settings intact.
Disabling the workflow migration message
If you don’t want to migrate and want to disable the migration message, click on Disable this message in the message. The Preferences → Databases page will open where you can uncheck the option Offer the migration of workflows that contain deprecated database nodes as shown in the figure below. Click Apply and Close to save the setting and the message will not appear anymore if you open a workflow containing deprecated database nodes. To reverse this setting, simply open Preferences → Databases page again and enable the check box.
Node Name Mapping
The table below shows the mapping between the deprecated database nodes and the new database nodes.
| Deprecated Database nodes | New Database nodes |
|---|---|
- |
|
Amazon Athena Connector |
|
Amazon Redshift Connector |
|
Database Apply-Binner |
|
Database Auto-Binner |
|
Database Column Filter |
|
Database Column Rename |
|
Database Connection Table Reader |
|
Database Connection Table Writer |
|
Database Connector |
|
Database Delete |
DB Delete (Table) or DB Delete (Filter) |
Database Drop Table |
|
Database GroupBy |
|
Database Joiner |
|
Database Looping |
|
Database Numeric-Binner |
|
Database Pivot |
|
Database Query |
|
Database Reader |
|
Database Row Filter |
|
Database Sampling |
|
Database Sorter |
|
Database SQL Executor |
|
Database Table Connector |
Can be replaced with DB Connector and DB Table Selector |
Database Table Creator |
|
Database Table Selector |
|
Database Update |
|
Database Writer |
|
H2 Connector |
|
Hive Connector |
|
Hive Loader |
|
Impala Connector |
|
Impala Loader |
|
Microsoft SQL Server Connector |
|
MySQL Connector |
|
Parameterized Database Query |
|
PostgreSQL Connector |
|
SQL Extract |
|
SQL Inject |
|
SQLite Connector |
|
Vertica Connector |
|
- |
|
- |
|
- |
|
- |
|
- |
Register your own JDBC drivers for the deprecated database framework
The JDBC driver registration page for the deprecated database framework is no longer visible in the KNIME preferences. However, drivers can still be registered for the deprecated database framework.
| This section is only valid if you use the Database Connector (deprecated) node. To register driver for the new database framework e.g. the DB Connector node refer to the Register your own JDBC drivers section. |
To register new drivers, you need to create a new text file with the name driver.epf and the following content:
\!/=
/instance/org.knime.workbench.core/database_drivers=<PATH_TO_THE_JDBC_DRIVER>
file_export_version=3.0Here <PATH_TO_THE_JDBC_DRIVER> refers to the path that points to the drivers jar file. You can register several
drivers by concatenating the paths with ; as separator. The following shows an example that registers two different
JDBC driver (DB2 and Neo4J) with windows file path notation.
\!/=
/instance/org.knime.workbench.core/database_drivers=C\:\\KNIME\\JDBC\\db2\\db2jcc4.jar;C\:\\KNIME\\JDBC\\Neo4J\\neo4j-jdbc-driver-3.4.0.jar
file_export_version=3.0
If you use windows path notation in the <PATH_TO_THE_JDBC_DRIVER> that includes backslashes each backslash has
to be escaped by a second backslash.
|
Once created you need to import the driver.epf file into the KNIME Analytics Platform via File→Import Preferences.
After importing the driver preferences file, you need to restart KNIME Analytics Platform to have the legacy database framework pickup the new driver files.
Business Hub / Server Setup
This section contains everything related to executing workflows that contain database nodes on KNIME Hub and KNIME Server.
JDBC drivers on KNIME Hub and KNIME Server
KNIME Hub allows you to upload customization profiles to set up JDBC drivers on KNIME Hub executors and KNIME Analytics Platform clients.
KNIME Server also allows you to define customization profiles to automatically set up JDBC drivers on its own executors as well as KNIME Analytics Platform clients.
Instead of customization profiles, it is also possible to register JDBC drivers directly on the executor with a preferences file. In this case however, the preferences of the server executor and all KNIME Analytics Platform clients need to be kept in sync manually, so that the same drivers are available on both ends.
Server-side steps
-
Create a profile folder inside
<server-repository>/config/client-profiles. The name of the folder corresponds to the name of the profile. The folder will hold preferences and other files to be distributed. -
Copy the
.jarfile that contains the JDBC driver into the profile folder. -
Inside the profile folder, create a preferences file (file name ends with
.epf) with the following contents:/instance/org.knime.database/drivers/<DRIVER_ID>/database_type=<DATABASE> /instance/org.knime.database/drivers/<DRIVER_ID>/driver_class=<DRIVER_CLASS_NAME> /instance/org.knime.database/drivers/<DRIVER_ID>/paths/0=${profile:location}/<DRIVER_JAR> /instance/org.knime.database/drivers/<DRIVER_ID>/url_template=<URL_TEMPLATE> /instance/org.knime.database/drivers/<DRIVER_ID>/version=<DRIVER_VERSION>
Where:
-
<DRIVER_ID>: A unique ID for the JDBC driver, consisting only of alphanumeric characters and underscores. -
<DATABASE>: The database type. Please consult the preference page shown in Register your own JDBC drivers for the list of currently available types. -
<DRIVER_CLASS_NAME>: The JDBC driver class, for exampleoracle.jdbc.OracleDriverfor Oracle. -
<DRIVER_JAR>: The name of the.jarfile (including the file extension) that contains the JDBC driver class. Note that the variable${profile:location}stands for the location of the profile folder on each client that downloads the customization profile. It will be automatically replaced with the the correct location by each client. -
<URL_TEMPLATE>: The JDBC URL template to use for the driver. Please refer to the JDBC URL Template section for more information. Note that colons (:) and backslashes (\) have to be escaped with a backslash. Example:jdbc\:oracle\:thin\:@<host>\:<port>/<database>
-
<DRIVER_VERSION>: The version of the JDBC driver e.g.12.2.0. The value can be chosen at will.
-
-
KNIME Server executors need to be made aware of a customization profile, by adding this information to the
knime.inifile, so that they can request it from KNIME Server. Please consult the respective section of the KNIME Server Administration Guide on how to set this up.
| Please note that there are database-specific examples at the end of this section. |
Client-side steps
KNIME Analytics Platform clients need to be made aware of a customization profile so that they can request it from KNIME Server. Please consult the respective section of the KNIME Server Administration Guide for a complete reference on how to set this up.
In KNIME Analytics Platform, you can go to File → Preferences → KNIME → Customization Profiles. This opens the Customization Profiles page where you can choose which KNIME Server and profile to use. The changes will take effect after restarting KNIME Analytics Platform.
To see whether the driver has been added, go to File → Preferences → KNIME → Databases. In this page, drivers that are added via a customization profile are marked as origin: profile after the driver ID (see figure below). These drivers can be edited but not deleted. To delete a profile driver, please go to the Customization Profiles page and unselect the respective profile.
Default JDBC Parameters
Default JDBC Parameters provide a way for server admins to inject JDBC parameters on JDBC connections made
from workflows running on KNIME Server. These parameters take precedence over values specified in
the connector node. To specify an additional JDBC parameter, add the following lines to the .epf file
of your customization profile:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/<JDBC_PARAMETER>/type=<TYPE> /instance/org.knime.database/drivers/<DRIVER_ID>/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/<JDBC_PARAMETER>/value=<VALUE>
Where:
-
<DRIVER_ID>: The unique ID for the JDBC driver. -
<JDBC_PARAMETER>: The name of the JDBC parameter to set. -
<TYPE>and<VALUE>: A type and value that specifies what to set the JDBC parameter to.<TYPE>and<VALUE>can be chosen as follows:-
Setting
<TYPE>toCONTEXT_PROPERTYallows to specify workflow context related properties.<VALUE>can be set to one of:-
context.workflow.name: The name of the KNIME workflow. -
context.workflow.path: The mountpoint-relative workflow path. -
context.workflow.absolute-path: The absolute workflow path. -
context.workflow.user: The name of the KNIME Server user that executes the workflow. -
context.workflow.temp.location: The path of the workflow temporary location. -
context.workflow.author.name: The name of the workflow author. -
context.workflow.last.editor.name: The name of the user who last edited the workflow. -
context.workflow.creation.date: The creation date of the workflow. -
context.workflow.last.time.modified: The last modified time of the workflow. -
context.job.id: The job id when run on KNIME Server.
-
-
Setting
<TYPE>toCREDENTIALS_LOGINallows to specify the login name from a credentials flow variable. Set<VALUE>to the name of the flow variable. Please note that the value is the name of the credentials flow variable to get the login from but not the login itself. -
Setting
<TYPE>toCREDENTIALS_PASSWORDallows to specify the password from a credentials flow variable. Set<VALUE>to the name of the flow variable. Please note that the value is the name of the credentials flow variable to get the password from but not the password itself. -
Setting
<TYPE>toDELEGATED_GSS_CREDENTIALallows to pass in a delegated GSS credential. The credential is only available for Kerberos authentication and during KNIME Server execution. The KNIME Server executor creates the delegated GSS credential in the name of the current KNIME Server user that executes the workflow. Do not set any<VALUE>for this parameter type. For an example on how to use this parameter see the Microsoft SQL Server example. -
Setting
<TYPE>toFLOW_VARIABLEallows to specify a flow variable. Set<VALUE>to the name of the flow variable. -
Setting
<TYPE>toGSS_PRINCIPAL_NAMEallows to pass in the principal name of the (delegated) Kerberos user e.g.,User@REALM.COM. The Kerberos principal name is only available for Kerberos authentication. Do not set any<VALUE>for this parameter type. For an example on how to use this parameter see the PostgreSQL example. -
Setting
<TYPE>toGSS_PRINCIPAL_NAME_WITHOUT_REALMallows to pass in the principal name without the REALM of the (delegated) Kerberos user. For example, if the Kerberos principal name isUser@REALM.COMthe value will beUser. The Kerberos principal name is only available for Kerberos authentication. Do not set any<VALUE>for this parameter type. For an example on how to use this parameter see the PostgreSQL example. -
Setting
<TYPE>toLITERALallows to specify a literal value that does not undergo any further substitution. Set<VALUE>to the literal value. -
Setting
<TYPE>toLOCAL_URLallows to specify a URL in<VALUE>, such as a "knime" URL.
-
| Please note that there are database-specific examples at the end of this section. |
Reserved JDBC Parameters
Certain JDBC parameters can cause security issues when a workflow is executed on KNIME Server, e.g.
DelegationUID for Impala/Hive connections using a Simba based driver.
Such parameters can be marked as reserved to prevent workflows from using them on KNIME Server. To
set a parameter as reserved, add the following lines to the .epf file of your customization profile:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/reserved/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/<JDBC_PARAMETER>=true
Or the shorter version:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/reserved/*/knime.db.connection.jdbc.properties/<JDBC_PARAMETER>=true
Where:
-
<DRIVER_ID>: The unique ID for the JDBC driver. -
<JDBC_PARAMETER>: The name of the JDBC parameter.
| Please note that there are database-specific examples at the end of this section. |
Connection Initialization Statement
The connection initialization statement provides a way for server admins to inject a SQL statement
that is executed when a JDBC connection is created from a workflow running on KNIME Server.
This statement takes precedence over all other statements executed within the workflow.
To specify an initialization statement, add the following line to the .epf file
of your customization profile:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/additional/java.lang.String/knime.db.connection.init_statement/value=<VALUE>
Where:
-
<DRIVER_ID>: The unique ID for the JDBC driver. -
<VALUE>: A value that specifies the statement to execute. It is possible to useCONTEXT_PROPERTYvariables inside the<VALUE>. These variables are replaced by the workflow context related properties right before the statement is executed. These variables have the following format:${variable-name}. The following variable names are available:-
context.workflow.name: The name of the KNIME workflow. -
context.workflow.path: The mountpoint-relative workflow path. -
context.workflow.absolute-path: The absolute workflow path. -
context.workflow.user: The name of the KNIME Server user that executes the workflow. -
context.workflow.temp.location: The path of the workflow temporary location. -
context.workflow.author.name: The name of the workflow author. -
context.workflow.last.editor.name: The name of the user who last edited the workflow. -
context.workflow.creation.date: The creation date of the workflow. -
context.workflow.last.time.modified: The last modified time of the workflow. -
context.job.id: The job id when run on KNIME Server.
-
Kerberos Constrained Delegation
This section describes how to configure KNIME Server to perform Kerberos constrained delegation (or user impersonation) when connecting to a Kerberos-secured database such as Apache Hive, Apache Impala, Microsoft SQL Server or PostgreSQL. Constrained delegation allows the KNIME Server to execute database operations on behalf of the user that executes a workflow on a KNIME Server Executor rather than the KNIME Executor Kerberos ticket user.
To get started, you need to configure the KNIME Server to authenticate itself against Kerberos. To do so you need to setup the KNIME Server Executors as described in the Kerberos Admin Guide.
Once all KNIME Server Executors are setup to obtain a Kerberos ticket you can enable Kerberos constrained delegation for individual JDBC drivers using one of the following methods.
| Please note that there are database-specific examples at the end of this section. |
Default JDBC Parameters
Default JDBC Parameters provide a way for server admins to inject JDBC parameters on
JDBC connections made from workflows running on KNIME Server. Depending on the database a different parameter and
value is used to perform constrained delegation. Some drivers only require the name of the user that should be
impersonated. This can be done using the name of the KNIME Server user that executes the workflow (context.workflow.user)
as the value of the driver specific property. See Hive or
Impala for an example.
Other drivers require the delegated GSS credential as parameter which can automatically be passed to the driver via the value
type DELEGATED_GSS_CREDENTIAL. The GSS credential is obtained using the
MS-SFU Kerberos 5 Extension. See Microsoft SQL Server
for an example.
Service Ticket Delegation
If the driver does not provide a dedicated parameter to do constrained delegation the KNIME Executor can request a Kerberos service ticket on behalf of the user that executes the workflow using the MS-SFU Kerberos 5 Extension. The obtained service ticket is then used by the JDBC driver when establishing the connection to the database.
To request the service ticket the KNIME Executor requires the service name and the fully qualified hostname.
To specify the service name add the following line to the .epf file of your KNIME Executors
customization profile:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/additional/java.lang.String/knime.db.connection.kerberos_delegation.service/value=<VALUE>
Whereas <VALUE> is the name of the service to request the Kerberos ticket for. See
PostgreSQL for an example.
The fully qualified hostname is automatically extracted from the hostname setting for all dedicated connector
nodes. For the generic DB Connector node the name is extracted from the JDBC connection string
using a default regular expression (.*(?:@|/)([^:;,/\\]*).*) that should work out of the box for most JDBC strings.
However if necessary it can be changed by adding the following line to the .epf file of your KNIME Executors
customization profile:
/instance/org.knime.database/drivers/<DRIVER_ID>/attributes/additional/java.lang.String/knime.db.connection.kerberos_delegation.host_regex/value=<VALUE>
The <VALUE> should contain a regular expression that extracts the fully qualified hostname from the JDBC URL with the
first group matching the hostname.
Connection Initialization Statement
The connection initialization statement provides a way for server admins to inject a
SQL statement that is executed when a JDBC connection is created from a workflow running on KNIME Server. This
function can be used for constrained delegation in some databases such as
Exasol by executing a specific SQL statement with the
context.workflow.user as variable e.g.
IMPERSONATE ${context.workflow.user};
Example: Apache Hive™
Connections to Apache Hive require further setup steps depending on the used JDBC driver. In this example we will show how to:
-
Register the proprietary Hive JDBC driver provided by Cloudera on KNIME Server.
-
Configure user impersonation on KNIME Server (for both embedded and proprietary Hive JDBC driver).
Proprietary Simba-based JDBC driver registration
| If the use of embedded open-source Apache Hive JDBC Driver is preferred, skip to the next section. |
-
Download the proprietary Hive JDBC driver from the Cloudera website.
-
Create the profile folder inside
<server-repository>/config/client-profilesand name itClouderaHive(for example). -
Copy
HiveJDBC41.jarfrom the downloaded JDBC driver into the newly created profile folder. -
In the profile folder, create a new preferences file called
hive.epf(for example) with the following contents:/instance/org.knime.database/drivers/cloudera_hive/database_type=hive /instance/org.knime.database/drivers/cloudera_hive/driver_class=com.cloudera.hive.jdbc41.HS2Driver /instance/org.knime.database/drivers/cloudera_hive/paths/0=${profile:location}/HiveJDBC41.jar /instance/org.knime.database/drivers/cloudera_hive/url_template=jdbc\:hive2\://<host>\:<port>/[database] /instance/org.knime.database/drivers/cloudera_hive/version=2.6.0
-
If, as recommended, KNIME Server has to impersonate workflow users, go to the next section.
User impersonation on Hive
This example sets up the Hive JDBC driver (embedded or proprietary) so that KNIME Server will impersonate workflow users on JDBC connections.
Activating user impersonation on Hive depends on the used JDBC driver:
-
For the embedded Apache Hive JDBC driver, add the following lines to the KNIME Server preferences file.
/instance/org.knime.database/drivers/hive/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/hive.server2.proxy.user/type=CONTEXT_PROPERTY /instance/org.knime.database/drivers/hive/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/hive.server2.proxy.user/value=context.workflow.user /instance/org.knime.database/drivers/hive/attributes/reserved/*/knime.db.connection.jdbc.properties/hive.server2.proxy.user=true
-
For the proprietary Simba-based JDBC driver, add the following lines to the preferences file (use the preferences file created in the previous step (step 4).
/instance/org.knime.database/drivers/cloudera_hive/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/DelegationUID/type=CONTEXT_PROPERTY /instance/org.knime.database/drivers/cloudera_hive/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/DelegationUID/value=context.workflow.user /instance/org.knime.database/drivers/cloudera_hive/attributes/reserved/*/knime.db.connection.jdbc.properties/DelegationUID=true
Example: Apache Impala™
In this example we will register the proprietary Impala JDBC driver provided by Cloudera on KNIME Server. This example sets up the driver so that KNIME Server will impersonate workflow users on JDBC connections.
| If you use the embedded open-source Apache Hive JDBC Driver (for Impala), you don’t need to do this step. However, please note that in this case user impersonation on KNIME Server is not possible due to limitations of the driver. |
-
Download the the proprietary Impala JDBC from the Cloudera website.
-
Create the profile folder inside
<server-repository>/config/client-profilesand name itClouderaImpala(for example). -
Copy
ImpalaJDBC41.jarfrom the downloaded JDBC driver into the newly created profile folder. -
In the profile folder, create a new preferences file called
impala.epf(for example) with the following contents:/instance/org.knime.database/drivers/cloudera_impala/database_type=impala /instance/org.knime.database/drivers/cloudera_impala/driver_class=com.cloudera.impala.jdbc.Driver /instance/org.knime.database/drivers/cloudera_impala/paths/0=${profile:location}/ImpalaJDBC41.jar /instance/org.knime.database/drivers/cloudera_impala/url_template=jdbc\:impala\://<host>\:<port>/[database] /instance/org.knime.database/drivers/cloudera_impala/version=2.6.0 /instance/org.knime.database/drivers/cloudera_impala/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/DelegationUID/type=CONTEXT_PROPERTY /instance/org.knime.database/drivers/cloudera_impala/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/DelegationUID/value=context.workflow.user /instance/org.knime.database/drivers/cloudera_impala/attributes/reserved/*/knime.db.connection.jdbc.properties/DelegationUID=true
Note that the last three lines use the
DelegationUIDJDBC parameter to force user impersonation (recommended). If you do not want KNIME Server to impersonate workflow users you can remove the last three lines.
Example: Microsoft SQL Server
Connections to Microsoft SQL Server require further setup steps. In this example we will show how to:
-
Register the SQL Server JDBC driver provided by Microsoft on KNIME Server.
-
Configure user impersonation on KNIME Server which is recommended for Kerberos authentication.
Microsoft driver installation
The SQL Server JDBC driver from Microsoft requires some special licensing that you need to agree to. That is why KNIME provides an additional plug-in to install the driver. In order to install the plug-in follow the steps as described in the Third-party Database Driver Plug-in section.
Constrained delegation on Microsoft SQL Server
If you use Kerberos based authentication for Microsoft SQL Server, we recommend to also setup user impersonation. This example sets up the Microsoft SQL Server JDBC driver so that KNIME Server will impersonate workflow users on JDBC connections. For further details about using Kerberos integrated authentication with Microsoft SQL Server see the Microsoft SQL Server documentation.
Activate the user impersonation for the embedded Microsoft SQL Server driver, by adding the following line to the KNIME Server preferences file.
/instance/org.knime.database/drivers/built-in-mssqlserver-9.4.0/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/gsscredential/type=DELEGATED_GSS_CREDENTIAL
In the Microsoft SQL Server Connector ensure that you have selected Kerberos in the Authentication setting in the configuration window and added the following two parameters to the JDBC Parameters tab:
authenticationScheme=JavaKerberos integratedSecurity=true
These parameters can be set automatically as Default JDBC Parameters via the KNIME Server preferences file by adding the following lines:
/instance/org.knime.database/drivers/built-in-mssqlserver-9.4.0/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/authenticationScheme/type=literal /instance/org.knime.database/drivers/built-in-mssqlserver-9.4.0/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/authenticationScheme/value=JavaKerberos /instance/org.knime.database/drivers/built-in-mssqlserver-9.4.0/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/integratedSecurity/type=literal /instance/org.knime.database/drivers/built-in-mssqlserver-9.4.0/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/integratedSecurity/value=true
| If you want to use your own driver you must exchange the built-in driver id (built-in-mssqlserver-9.4.0) with the ID of your driver. For further information on how to setup your own driver see the JDBC drivers on KNIME Hub and KNIME Server section. |
For further details about the parameters that are used for constrained delegation see the Microsoft SQL Server documentation.
Example: Oracle Database
Connections to Oracle Database require further setup steps. In this example we will show how to:
-
Register the Oracle Database driver provided by Oracle on KNIME Server.
-
Configure user impersonation on KNIME Server which is recommended for Kerberos authentication.
Oracle Database driver installation
The Oracle Database JDBC driver requires some special licensing that you need to agree to. That is why KNIME provides an additional plug-in to install the driver. In order to install the plug-in follow the steps as described in the Third-party Database Driver Plug-in section.
Constrained delegation on Oracle Database
If you use Kerberos based authentication for Oracle Database, we recommend to also setup constrained delegation.
Activate the Kerberos constrained delegation for the installed Oracle driver by adding the
following lines to the KNIME Server preferences file (e.g. oracle.epf).
/instance/org.knime.database/drivers/built-in-oracle-19.14.0/attributes/additional/java.lang.String/knime.db.connection.kerberos_delegation.service/value=oracle
| If you want to use your own driver you must exchange the built-in driver id (built-in-oracle-19.14.0) with the ID of your driver. For further information on how to setup your own driver see the JDBC drivers on KNIME Hub and KNIME Server section. |
The service name itself is not used so any non-empty string will enable constrained delegation.
Example: PostgreSQL
If you use Kerberos based authentication for PostgreSQL, we recommend to also setup constrained delegation.
Activate the Kerberos constrained delegation for the embedded PostgreSQL driver by adding the following line to the KNIME Server preferences file.
/instance/org.knime.database/drivers/built-in-postgres-42.3.5/attributes/additional/java.lang.String/knime.db.connection.kerberos_delegation.service/value=postgres
The default service name for PostgreSQL is postgres, but it might be different depending on your database setup. In that case, you need to change postgres in the above-mentioned line to the service name.
By default the PostgreSQL driver uses the operation system user as user during login when using Kerberos authentication which will cause problems when the workflow is executed on the KNIME Server. Depending on your database setup you either want to set it to the Kerberos principal name with or without REALM or the context.workflow.user depending on your database setup.
To set the user name to the principal name including the REALM e.g. User@REALM.COM use the following line:
/instance/org.knime.database/drivers/built-in-postgres-42.3.5/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/user/type=GSS_PRINCIPAL_NAME
To use the principal name without the REALM use this line instead:
/instance/org.knime.database/drivers/built-in-postgres-42.3.5/attributes/additional/org.knime.database.util.DerivableProperties/knime.db.connection.jdbc.properties/user/type=GSS_PRINCIPAL_NAME_WITHOUT_REALM
| If you want to use your own driver you must exchange the built-in driver id (built-in-postgres-42.3.5) with the ID of your driver. For further information on how to setup your own driver see the JDBC drivers on KNIME Hub and KNIME Server section. |